Job requirements:

1. Will be responsible for scheduling in oil, gas, petrochemical, refinery projects or facilities, planning and scheduling terminology such as WBS, Level I, II, and III schedules, progress curves, CPM, manpower loading and project completion schedule.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS with minimum 15 years of relevant experience in the related field.
2. Experience in Saudi ARAMCO Projects is highly preferable.
3. Must have Working knowledge of Primavera and MS Project. 
4. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for document control, secretarial works, etc. and must be aware of the latest programs and their applications.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Arts/ Commerce) with minimum 5 years of relevant experience in document control and secretarial work.
2. Proficiency in Computers.
3. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for supervising various infrastructure projects including roads and culverts, utilities, water and sanitary irrigation systems, etc.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Civil) with minimum 10 years site supervision experience with at least 5 years in supervision of infrastructure projects, etc.
2. Experience in roads and culverts, utilities, water and sanitary irrigation systems, etc. would be an added advantage.
3. Proficiency in Computers.
4. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for supervising various infrastructure projects.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma with minimum 10 years site supervision experience with at least 5 years in supervision of infrastructure projects (mainly roads), high- rised structures, pumping stations and laying of pipelines of large diameter.
2. Proficiency in Computers.
3. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for drafting works with Micro station, 3d MAX, Photo shop, etc.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Architecture) with minimum 5 years of relevant experience in the related field.
2. Experience in Saudi ARAMCO Projects is highly preferable.
3. Must have sound knowledge of Micro station, 3d MAX, Photo shop, etc.
4. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for purification plants and hydraulic design for water strategic projects, usage of the latest programs and their applications.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Civil) with minimum 15 years of relevant experience in the related field.
2. Must have experience and knowledge of water hammer and supervision of implementing solutions. 
3. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for designing and programming and hence, should be well-versed in standards, codes (preferably American codes & standards) and calculations.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Mechanical) with minimum 10 years of relevant experience in the related field.
2. Experience in Saudi ARAMCO Projects is highly preferable.
3. Must be well versed in design programs for pipelines and process such as Caesar II, etc. in AutoCAD and Microstation.
4. Proficiency in Computers.
5. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible to undertake traffic studies, transportation planning, etc and use specialized programs like Trans CAD. Visum, etc.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Civil) with minimum 10 years of relevant experience in the related field.
2. Must have expertise in specialized programs like Trans CAD. Visum, etc.
3. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for designing and hence, should be well-versed in design standards, codes (preferably American codes & standards) and calculations.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Mechanical) with minimum 10 years of relevant experience in the related field.
2. Experience in Saudi ARAMCO Projects is highly preferable.
3. Must be well versed in mechanical design programming for HVAC, pipe design, Fire Fighting Systems viz. Elite, HAP, etc.
4. Proficiency in Computers.
5. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for designing and programming and hence, should be well-versed in design standards, codes (preferably American codes & standards) and calculations.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Electrical) with minimum 10 years of relevant experience in the related field.
2. Experience in Saudi ARAMCO Projects is highly preferable.
3. Must be well versed in electrical design programming for lighting, ETAP, etc.
4. Proficiency in Computers.
5. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for designing and hence, should be well-versed in design standards, codes (preferably American codes & standards) and calculations.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. BS (Architecture) with minimum 10 years of relevant experience in the related field.
2. Experience in Saudi ARAMCO Projects is highly preferable.
3. Must be well versed in using design programs like 3D Max, AutoCAD, etc.
4. Proficiency in Computers.
5. Should have a valid PASSPORT.

Job requirements:

1. Will be responsible for delivering the information and data integrity of the enterprise and also all information service function like data centers, computer program development, computer system operation etc.
2. Should be able to develop and implement management information system as per company policy and programs, providing hardware and software support to user departments for smooth functioning of the department, coordinate with supplier for system related product/support and up gradation of the system to have latest technology / versions, system back up, recovery procedure follow up and monitor, training of people to ensure effective implementation of software to achieve company objectives, system security and safety and managing IT related special projects.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (IT)/MCA with minimum 10 years of relevant experience in Oracle base System design and MIS Implementation.
2. Should have training experience in system analysis and design, programming and various computer languages.
3. Should possess sound functional knowledge of various business processes like finance, manufacturing, sales and HRM.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Job requirements:

1. Will be responsible for management of marketing and sales activities for achieving targeted growth and profitability, assisting management in preparing business plan, marketing and sales strategy formulation, implementation of systems, policies and procedures, monitoring market share and implementing corrective actions, manage  client relationship, competitors analysis, guiding proposal manger in proposals and biding· Guiding proposal manager in negotiations and contract finalization.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E/ MBA(Sales and Marketing/ Contract Management) with minimum 10 years of relevant experience in sales and contracting in heavy fabrication industry and preferably dealt with multinational EPCs and  large  end user clients in oil and gas sector.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for procurement of all direct and indirect materials and services required by the company in the best terms of price, quality and delivery, establish policies, standards, schedules and supply sources to ensure quality, delivery and cost effectiveness, sourcing for direct project items , indirect materials and subcontractors, selecting suppliers , inviting quotations and  coordinating bid evaluation, comparing bid material cost with the budget and reconcile variance with project manager, commercial negotiations ,placing purchase orders as per mile stone and project plan, expediting material procurement and updating material status report and managing custom clearance and transportation of materials.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E (Mechanical) or equivalent with minimum 15 years of relevant experience in procurement of materials & consumables for Pressure vessels Industry with wide exposure to global sourcing.
2. Preference should be given to MBA/ Diploma having adequate training in materials management.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be responsible for managing all construction, maintenance and repair including shutdown maintenance activities at client's site, ensure that all work is executed in a safe manner and in accordance to clients work permit system, liaise with manager of projects and interface with client's representative throughout all planned activities.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E (Mechanical) or equivalent with minimum 10 years of relevant experience in heavy fabrication, site construction & maintenance management.
2. Should possess people management skill with ability to handle more than 500 workmen. 
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be responsible for project coordination to achieve delivery within contractual date and within budgeted cost for one or more projects from award of contracts to job close out including kick off meeting, review job package of the individuals jobs assigned to project manager, planning of the project activities including mile stone chart, project master schedule and cash flow plan of the assigned project, monitoring and review of the job progress of the assigned project and inform to technical manager for corrective actions for schedule slippage if any, monitoring and review of the cost over run with respect to budget and initiate corrective actions for minimizing cost over run with information to technical manager.
2. Should be able to communicate with client / customer for facilitating data / document transfer approvals, progress reports and expediting meetings, arranging kick off meetings, changed scope of work with respect to contracts for the assigned project, monitoring and recording all payments made by client and initiate request for invoice, job close out including information on LD settlement to technical manager , planning for manpower and other resource requirement for the assigned projects, customer feed back analysis and corrective and preventive actions.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E (Mechanical) or equivalent with minimum 10 years of relevant experience in management /project planning and monitoring in heavy fabrication industry and preferably dealt with multinational EPCs and large end user clients in oil and gas sector.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for leading and organizing the entire fabrication and construction activities to ensure overall quality of the final products and supply within contractual delivery time.
2. Should be required to establish production objectives, standards and production schedules to ensure quality, timely delivery and cost effectiveness.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E (Mechanical) or equivalent with minimum 15 years of relevant experience in fabrication of large pressure vessels with wide exposures to various fabrication technologies.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for leading and organizing the entire quality assurance, quality control and safety function for ensuring quality of raw materials, in process and finished products, establish objectives, set quality standards and take initiate  to minimize cost of non-conformance.
2. Should be able to plan and implement policies and programs for quality assurance and control, monitor and measure processes and products, control of non conformities and continual improvement of products and processes, establish ITP and coordinate with client for quality related issues, incoming raw material quality control, in process and final Inspection, quality documentation, supplier evaluation and planning and implementation of environment and safety policy.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E (Mechanical) or equivalent with minimum 15 years of relevant experience in quality management of large pressure vessels fabrication with wide exposure to various QMS.
2. Certification courses in Quality, NDT Level-III should be preferred.
3. Must have training experience in the field design of Quality Management.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Job requirements:

1. Will be responsible for the overall management of engineering process to meet the specified objectives.
2. Should be able to plan, monitor and control the functioning of the engineering department, identify weak areas and initiate steps for continual improvement, identify and arrange resources needed for achieving the objectives, identify, analyze and resolve engineering issues within the department and the company, coordinate with other process owners to resolve outstanding issues.
3. Should be required to technically evaluate RFQ’s for acceptance, approve design reports, drawings, material requisitions and any other document / report generated by the engineering process, participate in technical review meetings, pre-Inspection meetings, kick off meetings and ISO reviews/audits.
4. Should regulate the functioning of the engineering process to conform to changes arising from such interactions.
5. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E (Mechanical) or equivalent with minimum 10 years of relevant experience in fabrication of for large pressure vessels and other static equipments.
2. Must have training experience in the field design of pressure vessels, heat exchangers and other static process equipments.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be responsible for leading and organizing the entire fabrication and construction activities so as to ensure overall quality of the final product and supply within contractual delivery time.
2. Should be able to establish production objectives, standards and production schedules to ensure quality, timely delivery and cost effectiveness, planning and evaluating the fabrication methods for optimizing the overall cost of each Project, formulating the number and trade composition of human resources to suit production work load and planning of the other fabrication resources; monitoring and controlling man hours and consumable used for each job against budget and controlling shop floor efficiency and study and defining the handling, lifting, load out and transport.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E (Mechanical) or equivalent with minimum 15 years of relevant experience in fabrication of for large pressure vessels with wide exposure to various fabrication technologies.
2. Must have training experience in the field of pressure vessel fabrication and production management.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be required to support Project Manager in providing overall planning, scheduling & progress measurement services to the project.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B. E with minimum 8 years of relevant experience in planning and project control in large EPC projects.
2. Experience with detailed planning and schedule, progress, cost control activities in large EPC projects would be an advantage. 
3. Primavera P6 knowledge is a must.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be required to work upon auditing activities including document review, actual audit and its reporting and exercise judgment against the criteria of the standards.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. University degree with minimum 8 years of direct experience in Quality Control and Quality Assurance system activities related to Engineering/Design Projects (Oil and Gas, Petrochemical industries etc).
2. Should have demonstrated knowledge and training in ISO 9000 series international standards.
3. Should have Good Communication (Oral and Written) skill.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be required to work upon communication CADD using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma /Any relevant education with minimum 2 years of relevant experience in engineering consultancy offices.
2. Must have knowledge in Communication CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

Saudi Arabia

Job requirements:

1. Will be required to work upon communication CADD using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma /Any relevant education with minimum 8 years of relevant experience in engineering consultancy offices.
2. Must have expertise in Communication CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design projects involving outside plant works, access control, public address, fire detection and alarm, mobile communication, security systems, structured cabling and data networking.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Electronics/Communication) with minimum 8 years of relevant experience with engineering design consultancy offices deal with Oil and Gas, Petrochemical, refinery and Power projects.
2. Should be capable of leading a team of engineers and designers.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design projects involving outside plant works, access control, public address, fire detection and alarm, mobile communication, security systems, structured cabling and data networking.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Electronics/Communication) with minimum 12 years of relevant experience with engineering design consultancy offices deal with Oil and Gas, Petrochemical, refinery and Power projects.
2. Should be capable of leading a team of engineers and designers.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be required to work upon Structural CADD using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma /Any relevant education with minimum 8 years of relevant experience in engineering consultancy offices.
2. Must have expertise in Structural CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be required to work upon civil CADD using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma /Any relevant education with minimum 8 years of relevant experience in engineering consultancy offices.
2. Must have expertise in Civil CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Civil/Architecture) with minimum 8 years of experience in engineering design consultancy offices dealing with Oil and Gas, Petrochemical, refinery and Power projects.
2. Should be capable of leading a team of architects and designers.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design projects involving site selection, grading, utilities, storm/oily water drainage system, roads, etc.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Civil) with minimum 8 years of relevant experience in engineering design consultancy offices dealing with Oil and Gas, Petrochemical, refinery, material handling and Power projects.
2. Should be capable of leading a team of engineers and designers.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design projects, analysis and design of concrete/steel structures including blast resistant design of PIBs/Sub-stations.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Degree in Civil/Structural Engineering with minimum 8 years of relevant experience in engineering design consultancy offices dealing with Oil and Gas, Petrochemical, refinery, material handling and Power projects.
2. Must have proficiency in STAAD-PRO.
3. Should be capable of leading a team of engineers & designers.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for working in HVAC, plumbing, fire protection CADD works using Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma with minimum 8 years of relevant experience in engineering consultancy offices. 
2. Should have expertise in HVAC/Plumbing/Fire protection CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for handling DX type and chilled water systems, designing plumbing and fire fighting systems.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 8 years of relevant experience in engineering design consultancy offices deal with Industrial HVAC projects.  
2. Familiarity with Aramco standard is preferable.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for working on piping CADD works using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma with minimum 2 years of relevant experience in engineering consultancy offices.
2. Should have expertise in Piping CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

Saudi Arabia

Job requirements:

1. Will be responsible for working on piping CADD works using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma with minimum 8 years of relevant experience in engineering consultancy offices.
2. Should have expertise in Piping CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for installation, customization and administration of PDS project using EDEN programming language as well as Piping assembly language, creation of Oracle/MS SQL database, material data publisher, BOM extraction from PDS, trouble shoot PDS software related problems and impart PDS training to designers/Operators.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 5 years of relevant experience in PDS Administration and Piping design activities.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for undertaking design engineering assignments.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 3 years of relevant experience in engineering consultancy offices dealing with Oil and Gas, Petrochemical, Refinery and Power projects.
2. Must have knowledge of Aramco standards.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

Saudi Arabia

Job requirements:

1. Will be responsible for project handling involving basic or detail engineering independently.
2. Should be proficient in CAESAR II with adequate knowledge of PDS.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 8 years of relevant experience in engineering consultancy offices dealing with Oil and Gas, Petrochemical, Refinery and Power projects.
2. Must have knowledge of Aramco standards and hands on experience in SRU projects.
3. Exposure to NGL Power projects would be an added advantage.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design projects.
2. Should be proficient in CAESAR II with adequate knowledge of PDS.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 12 years of relevant experience in engineering consultancy offices dealing with Oil and Gas, Petrochemical, Refinery and Power projects.
2. Must have knowledge of Aramco standards and hands on experience in SRU projects.
3. Exposure to NGL Power projects would be an added advantage.
4. Should be capable of leading a team of engineers & designers.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for working on CADD tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma with minimum 8 years of relevant experience in engineering consultancy offices.
2. Must have hands on experience on CADD tools.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for software installation, project setup and configuration on the server and client, performing validation checks on generated drawings, customization of symbols, labels, data dictionary, filters, formats and reports, installation of Oracle, database creation, backup and restoration of P& IDs and preparation of work instruction for SP P&ID users and conducting trainings.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E with minimum 5 years of relevant experience in Smart Plant P&ID administration activities.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic, FEED and detailed design engineering involving upstream facilities, simulation works using HYSYS, material and energy balance, EIA & HAZOP and conversant with API, Shell and other international standards.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Chemical) with minimum 12 years of relevant experience in engineering design consultancy offices dealing with O&G, Petrochemical, refinery and Power projects.
2. Must have hands on experience in SRU projects.
3. Exposure to NGL power generation projects would be an added advantage.
4. Should be capable of leading a team of engineers and designers.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for working on I&C CADD work using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma with minimum 8 years of relevant experience in engineering consultancy offices.
2. Should have expertise in I&C CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible SPI/Intools based project setup, database administration and support, SPI domain administrator and SPI user support.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Degree holder in Instrumentation Engineering with minimum 5 years of relevant experience in engineering design consultancy offices dealing with Oil and Gas, Refinery and Petrochemical projects including minimum 3 years experience in SPI/Intools based project setup, database administration and support, SPI domain administrator and SPI user support.
2. Must have advanced working knowledge of relational databases (Oracle or MS SQL) and familiar with Server and work stations configuration and administration.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for development of design, calculations, datasheets, MTOs, technical specifications for DCS & PLCs and scope of work and familiarity with relevant vendors like Yokogawa, Honeywell, etc.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Degree holder in Instrumentation Engineering with minimum 8 years of relevant experience with engineering design consultancy offices dealing with Oil and Gas, Refinery and Petrochemical projects.
2. Familiarity with Aramco standards and exposure to SRU and NGL power generation projects is preferable.
3. Knowledge of SP Instrumentation will be an added advantage.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for development of design, calculations, datasheets, MTOs, technical specifications for DCS & PLCs and scope of work and familiarity with relevant vendors like Yokogawa, Honeywell, etc.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Degree holder in Instrumentation Engineering with minimum 12 years of relevant experience with engineering design consultancy offices dealing with Oil and Gas, Refinery and Petrochemical projects.
2. Familiarity with Aramco standards and exposure to SRU and NGL power generation projects is preferable.
3. Knowledge of SP Instrumentation will be an added advantage.
4. Should be capable of supervising and leading a design team.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for working in electrical CADD using tools like Microstation and AutoCADD.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Diploma with minimum 8 years of relevant experience in engineering consultancy offices.
2. Should have expertise in Electrical CADD works using Microstation and AutoCADD.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design of low, medium and high voltage electrical systems.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Electrical) with minimum 3 years of relevant experience in engineering design consultancy offices dealing with O&G, Petrochemical, refinery and Power projects.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Preferred Nationality:

Saudi Arabia

Job requirements:

1. Will be responsible for basic and detailed design of low, medium and high voltage electrical systems.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Electrical) with minimum 12 years of relevant experience in engineering design consultancy offices dealing with O&G, Petrochemical, refinery and Power projects.
2. Knowledge of Aramco standards and Hands on experience in SRU & NGL projects is a must.
3. Expertise in ETAP for load flow, short circuit & motor starting studies is a definite plus.
4. Should be able to lead a team of engineers and designers.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for basic and detailed design of low, medium and high voltage electrical systems.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E (Electrical) with minimum 12 years of relevant experience in engineering design consultancy offices dealing with O&G, Petrochemical, refinery and Power projects.
2. Knowledge of Aramco standards and Hands on experience in SRU & NGL projects is a must.
3. Expertise in ETAP for load flow, short circuit & motor starting studies is a definite plus.
4. Should be able to lead a team of engineers and designers.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible to interpret engineering drawings and provide costs for equipment, materials and labor activities required for conceptual, budget and detailed estimates.
2. Will be able to generate request for quotation (RFQ) to local as well as international vendors and know how to prepare purchase requisitions based on client specific standards.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E with minimum 8 years of relevant experience in estimation and procurement in oil and gas industry.
2. Preference would be given to ARAMCO experience.
3. Must be familiar with Saudi Aramco SAMS catalog CD, desktop standard (SAEP, SAES, SAMSS, etc.) and other international engineering standards and procedures.
4. Should be highly proficient in using engineering and enterprise programs such as SAP, K-Base and Timberline.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible to interpret engineering drawings and provide costs for equipment, materials and labor activities required for conceptual, budget and detailed estimates.
2. Will be able to generate request for quotation (RFQ) to local as well as international vendors and know how to prepare purchase requisitions based on client specific standards.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E with minimum 12 years of relevant experience in estimation and procurement in oil and gas industry.
2. Preference would be given to ARAMCO experience.
3. Must be familiar with Saudi Aramco SAMS catalog CD, desktop standard (SAEP, SAES, SAMSS, etc.) and other international engineering standards and procedures.
4. Should be highly proficient in using engineering and enterprise programs such as SAP, K-Base and Timberline.
5. Should have Good Communication (Oral and Written) skill.
6. Proficiency in computers (MS Office).
7. Should have a valid PASSPORT.
8. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible document tracking system and filing systems.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. Degree holder with minimum 8 years of relevant experience in similar capacity.
2. Experience in design consultancy/ EPC firms are preferred.
3. Proficiency in computers.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for project management and engineering of multi-disciplined projects for the various phases of design and engineering and services for oil, gas, petrochemical, utilities and infrastructure projects.
2. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E with minimum 8 years of relevant experience in design consultancy and EPC organizations.
2. Experience in EPC/ Construction management and KSA/ other gulf countries are preferred.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for project management and engineering of multi-disciplined projects on a lump sum and reimbursable rate basis for the various phases of design and engineering and services for oil, gas, refinery, petrochemical projects along with their associated sub-contracts.
2. Must be contractually and commercially astute.
3. Urgently send detailed CV by Email.

Desired Candidate Profile:

1. B.E with minimum 12 years of relevant experience in design consultancy and EPC organizations.
2. Experience in Aramco projects is a must.
3. Must have hands on experience on SRU and NGL Power Generation projects.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Preferred Nationality:

India, Pakistan and Philippines

Job requirements:

1. Will be responsible for entire materials functions such as vendor selection, order placement, materials receipt, issue , preservation and stores inventory, vendor rating and development, strategic sourcing, reverse auction, maintenance contracts and implementation of  SAP  in materials management
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. MBA with minimum 10 years of relevant job experience in managing purchase and stores for spares, consumable, raw materials, capital spares, etc.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for preparing product costing, accounting and financial analysis; prepare budgets, cash flow, project financials and MIS.
2. Should be able to prepare monthly/quarterly/annual MIS, monitor monthly performance against budgets, highlight variances and formulate mitigation plans, install appropriate internal control mechanisms and coordinate for internal/external audits and follow up on Zakat, tax certificates and related withholding tax liabilities.
3. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ICWA/CA/CPA with minimum 10 years of relevant job experience in managing finance and accounting of entire plant.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for order generation, cash collection, finished goods inventory, sales revenue, product-mix enrichment and new product/customer development.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. MBA with minimum 10 years of relevant job experience in marketing and sales of long products.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for working as Software engineer in SAP and common computer software.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Computer) with minimum 2 years of relevant job experience in computer software.
2. Must be well conversant with SAP implementation.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be responsible for plant automation, PLC and networking.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Electronics/ Instrumentation) with minimum 4 years of relevant job experience in similar industry.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for working as Lab Assistant in laboratory and quality inspection.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.Sc (Chemical) with minimum 3 years of relevant job experience in similar industry.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for assisting in laboratory and quality inspection.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.Sc / M.Sc (Chemical) with minimum 5 years of relevant job experience in similar industry.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for laboratory and quality inspection.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E/ Diploma (Metallurgy) with minimum 10 years of relevant job experience in steel metallurgy.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for planning and scheduling production of steel melt shop, caster and rolling mill and dispatch and inventory management.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. Graduate with minimum 5 years of relevant job experience in production planning and inventory management.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for coordinating with marketing for orders, new product development, preparing schedule for steel making and rolling mill, dispatch compliance, raw materials and finished goods inventory, materials movement across various plants and product-mix enrichment.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical /Metallurgy) with minimum 5 years of relevant job experience in production planning of steel plant.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for working as technician in electrical or instrument department.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Electrical/ Instrument) with minimum 5 years of relevant job experience as technician in similar organisation.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for working as technician in hydraulic department.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Mechanical/ Hydraulic) with minimum 5 years of relevant job experience as Hydraulic technician in similar organisation.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for repair and monitor maintenance job schedule for melt shop, rolling mill, oxygen plant etc. and maintenance budget.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 5 years of relevant job experience as Senior Maintenance engineer in similar organisation.
2. Should have hand-on experience in preparing SMP and must be well exposed to TPM/advanced maintenance practices.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be responsible for working as Senior Electrician in HT lines.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Electrical) with minimum 5 years of relevant job experience as Senior Electrician at Power Sub Station.
2. Must possess HT License.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be responsible for working as Mechanic at Oxygen Plant and NG Metering Station.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Mechanical) with minimum 5 years of relevant job experience as Mechanic at Oxygen Plant and NG Metering Station.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

Production capacity of Oxygen, Nitrogen & Argon is 2800, 2600 & 70 M3 /hr respectively.  Oxygen purity is more than 99.6%.

Job requirements:

1. Will be responsible for working as operator at Oxygen Plant and NG Metering Station.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA with minimum 5 years of relevant job experience as operator at Oxygen Plant and NG Metering Station.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

Production capacity of Oxygen, Nitrogen & Argon is 2800, 2600 & 70 M3 /hr respectively.  Oxygen purity is more than 99.6%.

Job requirements:

1. Will be responsible for working as Process Engineer at Oxygen Plant and NG metering station.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Chemical) with minimum 2 years of relevant job experience as Process Engineer at Oxygen Plant and NG metering station.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

Production capacity of Oxygen, Nitrogen & Argon is 2800, 2600 & 70 M3 /hr respectively.  Oxygen purity is more than 99.6%.

Job requirements:

1. Will be responsible for overall supervision and liaisoning including operation and maintenance of Oxygen plant and managing sourcing of Utilities.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Electrical/ Mechanical) with minimum 10 years of experience in operation and maintenance of Oxygen plant and managing sourcing of Utilities.
2. Should be well conversant with improvement initiatives such as TPM/TQM/VE/QC and cost reduction.
3. Must be liaison with Govt. and external agencies for power, water and gas supply.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Other Information:

Production capacity of Oxygen, Nitrogen & Argon is 2800, 2600 & 70 M3 /hr respectively.  Oxygen purity is more than 99.6%.

Job requirements:

1. Will be responsible for working as Technician on Rolling Mill.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Electrical/ Instrument) with minimum 5 years of relevant job as Technician in reputed organisation.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for working as Mechanic on Rolling Mill.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Mechanical) with minimum 5 years of relevant job as Mechanic in reputed organisation.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for preparing SMP and implementing best practices to improve plant reliability.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 2 years of relevant job experience in managing the rolling mill machines.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for working on CNC Machine.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI (Machining/ Mechanical) with minimum 5 years of relevant job experience as Roll lathe operator in reputed organisation.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for working as Roll Shop foreman.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Mechanical) with minimum 10 years of relevant job experience as Roll Shop Foreman in reputed organisation.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for designing roll pass.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 5 years of relevant job experience as Roll Pass Design Engineer in reputed organisation.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for furnace charging and operation as cooling area operator.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 5 years of relevant job experience as cooling area operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for furnace charging and operation as finishing train operator.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 5 years of relevant job experience as Finishing train operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for furnace charging and operation as Mill Train Operator.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 5 years of relevant job experience as Mill train operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for working in control room operation with PLC.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA with minimum 5 years of relevant job experience in control room operation with PLC.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for improving rolling parameters and optimising the cost.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Mechanical) with minimum 10 years of relevant job experience as Mill foreman in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for furnace charging and operation.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA with minimum 5 years of relevant job experience as Pulpit operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for furnace charging and operation.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 5 years of relevant job experience as furnace heater in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for furnace charging and operation.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 5 years of relevant job experience as Billet storage and furnace foreman in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for managing the operation, coordinating with maintenance/production planning/Procurement/Quality control and initiating corrective actions for improvement.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical / Metallurgy/ Electrical) with minimum 2 years of relevant experience for degree Engineer or 10 years of relevant experience for diploma holders.
2. Must be well conversant with improvement initiatives such as TPM/TQM/VE/QC and product mix enrichment for maximizing contribution.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be responsible for Plant parameters such as production, yield, conversion cost and Raw materials planning, in-process and raw materials inventory.
2. Should be able to perform capital repairs and modification, co-ordination with purchase for stock replenishment, product-mix enrichment and new product development, implementing SOP, SMP, Safety & Quality and sharing best practices and improvement initiatives.
3. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical / Metallurgy) with minimum 15 years of relevant job experience in managing the overall operation and maintenance of Steel Rolling Mill in reputed organisation.
2. Should possess technical and managerial skills and well conversant with improvement initiatives such as TPM/TQM/VE/QC and product mix enrichment for maximizing contribution.
3. Must have demonstration skill in enhancing the production and productivity of Steel Rolling Mill, creating a culture of improvement orientation & team building spirit, developing high performing workforce and driving the pace of implementation.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Other Information:

The plant  supplied by VAI Pomini  has  production capacity of 300,000 t/yr producing concrete reinforcing & round  bars  with 8- 40 mm diameter . Billets are rolled in the mill with 130 mm cross section x 12000 mm length.

Job requirements:

1. Will be able to work as Electrical or Instrument Technician.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Electrical/ Instrument) with minimum 5 years of relevant job experience as Electrical or Instrument Technician in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be able to work as Hydraulics Technician.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Mechanical/ Hydraulics) with minimum 5 years of relevant job experience as Hydraulics Technician in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be able to work as Mechanic.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA (Mechanical) with minimum 5 years of relevant job experience as mechanic in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for preparing SMP, implementing best practices and plant reliability.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 2 years of relevant job experience as Maintenance Engineer in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be able to work as Ladle Slide Gate and Porous Plug operator.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 3 years of relevant job experience as Ladle Slide Gate and Porous Plug Operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be able to work as Crane operator for charging and teeming.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. Matriculate with minimum 3 years of relevant job experience as Crane Operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be able to work as Ladle operator.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. Matriculate with minimum 3 years of relevant job experience as Ladle Operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

Continuous caster has three strands with production capacity 600,000 t/yr casting plain, low and medium carbon, low and medium alloyed steel and special steel.

Job requirements:

1. Will be able to work as Mould operator.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 5 years of relevant job experience as Mould Operator in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

Continuous caster has three strands with production capacity 600,000 t/yr casting plain, low and medium carbon, low and medium alloyed steel and special steel. 

Job requirements:

1. Will be able to work in control room with PLC.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA with minimum 5 years of relevant job experience in control room operation with PLC.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

Continuous caster has three strands with production capacity 600,000 t/yr casting plain, low and medium carbon, low and medium alloyed steel and special steel. 

Job requirements:

1. Will be able to work as Melter.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/ Matriculate with minimum 5 years of experience as Melter in reputed organization.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Other Information:

EAF  supplied by VAI Fuchs  has  capacity of 500,000 t/yr producing  low and medium Carbon Steel - Structural Steel Grades .EAF has  process parameters of  heat size 60 t, transformer rating 45 MVA and  electrode dia. 508 mm. with following injection technology:

1. Oxygen Injection capacity (Nm³/h) - 2 x 1750
2. Carbon Injection capacity (kg/min) - 2 x 50-80
3. Burner Power (MW) - 3 x 3.5

Job requirements:

1. Will be responsible for Plant parameters such as production, yield, conversion cost and Raw materials planning, in-process and raw materials inventory.
2. Should be able to perform capital repairs and modification, co-ordination with purchase for stock replenishment, product-mix enrichment and new product development, implementing SOP, SMP, Safety & Quality and sharing best practices and improvement initiatives.
3. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical / Metallurgy) with minimum 5 years of relevant job experience  for Senior Engineer and  10 years of relevant job experience  for Superintendent
2. Should possess technical and managerial skills and well conversant with improvement initiatives such as TPM/TQM/VE/QC and product mix enrichment for maximizing contribution.
3. Must possesses demonstration skills in enhancing the production & productivity of steel melt shop, developing high performing workforce and  facilitating cross functional project implementation.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Job requirements:

1. Will be responsible for Plant parameters such as production, yield, conversion cost and Raw materials planning, in-process and raw materials inventory.
2. Should be able to perform capital repairs and modification, co-ordination with purchase for stock replenishment, product-mix enrichment and new product development, implementing SOP, SMP, Safety and Quality and sharing best practices and improvement initiatives.
3. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical / Metallurgy) with minimum 15 years of relevant job experience in managing the overall operation and maintenance of EAF, LF and Continuous Caster.
2. Should possess technical and managerial skills and well conversant with improvement initiatives such as TPM/TQM/VE/QC and product mix enrichment for maximizing contribution.
3. Must possesses demonstration skills in enhancing the production & productivity of steel melt shop, creating a culture of improvement orientation & team building spirit, developing high performing workforce and driving the pace of implementation.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Job requirements:

1. Will be able to work with control room operation with PLC.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA with minimum 5 years of experience in control room operation with PLC.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be able to work as an Office Assistant.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. Any Graduate with minimum 5 years of experience as Office Assistant in any industry preferably in steel plant.
2. Proficiency in computers.
3. Should have Good Communication (Oral and Written) skill.
4. Should have a valid PASSPORT.
5. Willing to join immediately.

Job requirements:

1. Will be able to work in control room with PLC.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. ITI/DIPLOMA with minimum 5 years of relevant job experience in control room operation with PLC.
2. Should have a valid PASSPORT.
3. Willing to join immediately.

Job requirements:

1. Will be responsible for Plant parameters such as production, yield, conversion cost and Raw materials planning, in-process and raw materials inventory.
2. Should be able to perform capital repairs and modification, co-ordination with purchase for stock replenishment, product-mix enrichment and new product development, implementing SOP, SMP, Safety & Quality and sharing best practices and improvement initiatives.
3. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E /Diploma (Mechanical / Metallurgy) with minimum 2 years of experience for degree holder and minimum10 years of relevant job experience for diploma holder.
2. Should have well conversant with improvement initiatives such as TPM/TQM/VE/QC.
3. Should have a valid PASSPORT.
4. Willing to join immediately.

Job requirements:

1. Will be able to develop packages / literatures / presentations / digital sales tools and must have experience in Web designing and Graphics designing software like Quark, InDesign, Illustrator and Photoshop.
2. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E / Bachelors degree in Business Administration (Marketing/ Communications/ Journalism ) with minimum 8 years experience including  4 years in a similar / senior level position, preferably in steel structures manufacturing sector.
2. Should be expertise in writing, editorial and copywriting.
3. Proficient in the computer (MS Office) and ERP.
4. Should have Good Communication (Oral and Written) skill.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Job requirements:

1. Will be required to familiar with industry measurement tools such as IMS, TNS Media Intelligence, Competitrack, JW, Mintel, MRI, and Hoovers WEfff.
2. Should be able to prepare questionnaire design, research methodology and project management.
3. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. Bachelor’s degree (Economics/ Statistics/ Marketing/ Finance) /Post Graduate degree in Business Administration with minimum 10 years experience including 5 years in similar / senior level position and preferably 3 years in steel structures manufacturing sector.
2. Should be proficient in the use of SAS, SQL, SPSS, MS Office and ERP.
3. Should have Expertise in conducting statistical research and quantitative analysis and must have experience with geographic information systems.
4. Should have Good Communication (Oral and Written) skill.
5. Should have a valid PASSPORT.
6. Willing to join immediately.

Job requirements:

1. Will be required to ensure the timely delivery of in-depth Engineering Designs to the relevant parties based on specifications and the precision & accuracy in designing the in-depth details & specification of the drawings in order to minimize errors.
2. Should organize the effective & systematic improvement in the design of the system considering cost reduction while maintaining optimal quality & efficiency and build, manage & motivate the staff towards team development in order to maximize productivity & harmony.
3. Should have knowledge and exposure in HVAC and EPC projects.
4. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. Degree in Mechanical Engineering with around 10 years experience in R&D including atleast 5 years in Managerial role.
2. Should have knowledge and experience in theoretical & practical aspects of designing & developing HVAC system.
3. Should possess strong leadership and Innovative skills.
4. Should have Good Communication (Oral and Written) skill in English and Arabic.
5. Should possess strong Analytical, Planning and Negotiation Skills.
6. Proficiency in Computers.
7. Should have a valid PASSPORT.
8. Willing to join immediately.

Job requirements:

1. Will be required to organize the preparation of all relevant project planning, documentation and reports for communication, execution & compliance, monitor& Control the project’s expenditures against the defined budget allocation in order to maximize the profit revenue of the project and monitor & control receivables of the project in order to minimize the suspended proceeds.
2. Should lead in the consistent provision of quality &efficient services by the respective project teams in order to attain the utmost Customer satisfaction in line with Company’s Core values & Objectives and manage & motivate the staff towards team development in order to maximize productivity & harmony.
3. Should have knowledge and exposurein HVAC, EPC projects and Retrofitting.
4. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. B.E (Mechanical) with minimum 10 years relevant experience in Project Manager Role.
2. Should have Good Communication (Oral and Written) skill in English and Arabic.
3. Should possess Strong Analytical, Planning and Negotiation Skills.
4. Should have excellent leadership skills.
5. Proficiency in Computers (MS Office).
6. Should have a valid PASSPORT.
7. Willing to join immediately.

Job requirements:

1. Will be required to review each & every contract agreement along with its Terms & Conditions and check whether the contract is positively aligned to the interest of the company.
2. Should be able to monitor & mediate the conflict resolution between the customer/client and company on any project issues, evaluate the received change order request made by customer /client and verify against the present terms of the contract agreement, organize the preparations of payment request &monitoring of the projects receivables in order to maintain the receivables of the project to its minimum level and build, manage & motivate the staff towards team development  & exemplary performance in order to maximize productivity & harmony.  
3. Should have knowledge and exposure in EPC, HVAC projects and Retrofitting.
4. URGENTLY SEND DETAILED CV along with academic, experience certificates and photos By EMAIL/ Courier.
   

Desired Candidate Profile:

1. Degree in Finance/ Business with around 10 years experience in large scale Engineering /Construction firm including atleast 5 years experience in Managerial role.
2. Should have Knowledge in Contract preparation and Management.
3. Must have experience in Project Management.
4. Should have Good Communication (Oral and Written) skill in English and Arabic.
5. Should possess strong Analytical, Planning and Negotiation Skills.
6. Proficiency in Computers.
7. Should have a valid PASSPORT.
8. Willing to join immediately.